- 1). Click "Start" from any computer connected to your network, click "Programs," and open your Internet browser.
- 2). Enter your modem address, located in your Netgear instruction manual. This is typically either 192.168.0.1 or 192.168.1.1.
- 3). Enter your username and password for your Netgear router.
- 4). Click "Wireless Settings," "Wireless Network," and click "Security Options."
- 5). Select "WPA-PSK [TKIP] + WPA2-PSK [AES]" (enabling WPA protection) and input your desired password into the "Passphase" field.
- 6). Press "Apply" and "OK" to save changes, adding security to your Netgear network.
